Max resolution is x If someone still has problems, please do tell. Board index All times are UTC. How did u do that? Q Do you want to add it into blacklist?

Uploader: Narr
Date Added: 3 March 2010
File Size: 58.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45450
Price: Free* [*Free Regsitration Required]

Same problem here on Ubuntu If you look in the tpuchscreen up log for X you can see how your computer is trying to handle the touch screen.

I tried to install the driver that came on the CD and followed many instructions posted around the web but the only thing it does is to simulate right click on the upper left corner of the screen and nothing else.

This might be fixed upstream in kernel 2.

BUT there is a nasty hassle with the touchscreen ‘button’ emulation see below. Here is my installation note: Once the wizard is done, a piece of configuration is shown on terminal, use that scietnific snippet in xorg.

I’ll post back the results. First do a 4 Pts Calibration, then do 25 points linearization. Do yourself a favor and don’t bother trying to use these old drivers. You will now have a new folder called “eGalaxTouch32”. This was not the simple answer. Once you’ve tested the upstream kernel, please remove the ‘needs- upstream- testing’ tag.

Trying to get usb eGalax-like-touchscreen id: No errors, just plain stuck. The hal entry is stuff from version 9. The calibrations options are ok, but not quite that, they seem a little bit of at the right side of the screen, which makes it difficult to scroll windows.


How to get eGalax TouchScreen film (0eef:0001) working in Linux for Raspberry Pi

I then delete any current network connections you have, and, any old Wireless or Mobile connections you previously had used, through the ‘Network Connections’ software, then restart the Q1 ultra, i wouldn’t setup a Wireless connection again on the router your having these issues with, but would try someone elses router first, this may show the problems with your router.

I can confirm this used to work and have a nice callibration utility back in Ubuntu 8. You will need to extract the file “eGalaxTouch.

However using the above cited callibrator did not produce useful output for me. After rebooting the daemon was not running, so added to rc. Works for me too: Q Which interface controller do you use?

There might be some common tools. Please take the short Tour and visit the Help Center to see how things work here. So I can advice everyone with that problem to install xserver-xorg-input-evtouch and add a scientofic like mine to the directory xorg.

How to get eGalax TouchScreen film (0eef) working in Linux for Raspberry Pi – Black God

This bug was reported a while ago and there hasn’t been any activity in it recently. It includes a demo video. As I have it now, the correct calibration does not get set until after login. The key steps were: I’m writing this to summarize what worked for me on sgalax Asus EB, running Lucid Using my stylus the v-wav screen is accurate in the centre of the screen then it slowly tends to accelerate faster than I move the stylus in any direction from there. Touhscreen calibration seems to have worked fine, but I still have one remaining issue.


I would also mention that my Q1 Ultra has been fitted with the maximum memory modules allowed in it, and that i did have BIO’s updates installed via the Samsung Update Plus software when it was running Windows XP, i ran touchdcreen Samsung Update check on a regular basis, i’ve only been running Ubuntu Netbook Edition I had problems with eGalax touchscreen with my Asus TMT, the new kernel in Maverick works as a single touch screen, but not as the proper two finger mutitouch screen it should be.

Author: admin